Rope PICK-LINE 9.0

CHF 3.5CHF 690.0

Description

Pick-Line9.0 Canyoning rope

A hyper static and very durable 9mm rope for those who like to use a rope for more than only one trip.

The highly cut- and abrasion resistant fibers (Aramid with UV coating & Dyneema) in the sheath and the lightweight core make this rope a perfect combination.

It floats, is light and the thick rope sheath makes this rope very durable for its diameter.

The color is bright and very good visible.

The rope is CE marked and meets the requirements of Regulation (EU) 2016/425 on personal protective equipment.
The rope is tested according to EN1891 type B*

Rope Shrinkage:
During use the rope will shrink due to fiber and construction shrinkage, expext a length reduction.
Our ropes shrink less than most – but there is no standardized test for rope shrinkage during use, and the amount of shrinkage will vary with the details of usage.
Expect up to 8% length reduction over time.
We deliver the ropes 0.5m-1m longer than indicated, measured with our calibrated digital measurement tool.

Swiss Made:
The ropes are proudly produced and developed in Switzerland.
Every rope length is available, longer ropes up to 800m on request.

 

Technical information:

  • diameter: 9mm
  • breaking strength: 21kN
  • figure-8 knot strength: 13.5kN
  • weight: 45g/m
  • elongation (50kg-150kg): 1.9%
  • sheath: 45% sheath mass, material: Aramid with UV protection & UHMPE (Dyneema)
  • core: 55% core mass, material: Polypropylene
  • fall factor 0.5 > 15 falls
  • CE1019
  • EN1891 – type B*

* Except dynamic performance (fall factor 0.5 instead of 1) and materials (HMPE & Polypropylene)

Note:
It is not recommended to use this rope for dry canyons in dry condition due to the Dyneema in the rope sheath.
However, tests have shown that abseils up to 50m on dry ropes with a standard sized figure-8 kind of device can not damage the rope fibers due to heat generated by the friction of the abseil device.

 

User-Manual-ROPES-CE4Y

Declaration of Conformity

Technical Specification

Certificate

Additional information

Weight N/A
Diameter

9mm

Breaking strength

21kN

Elongation

1.8% (50kg-150kg)

Weight

45g/m

Length

100m, 200m, 50m, 60m, 70m, 80m, 1m

Core

55% core mass
Material: Polypropylene

Sheath

45% sheath mass
Material: Aramid & Dyneema (UHMWPE)

Certification

CE certified (CE1019)
Tested according to EN1891*
*Except dynamic performance (fall factor 0.5 instead of 1) and materials (HMPE & Polypropylene)

The rope withstands > 15 falls with 80kg steel mass at fall factor 0.5

Figure-8 knot breaking strength

13.5kN

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…